A concert T-shirt, an event giveaway and a team uniform might look similar. That does not mean they need the same treatment: the fabric, decoration and instructions from the supplier all matter.
Before washing, check the label and the print instructions
Start with the care symbols inside the garment. The number in the wash tub shows the maximum washing temperature, rather than a temperature you must use. Care instructions apply to the whole item, including its finishes and decorations, as explained in GINETEX’s labelling guidance.
If the design was added later, check the printer’s instructions too. The original label may not cover the needs of the new decoration: a temperature suitable for a plain T-shirt is not automatically suitable once it has been printed.
The same applies to the first wash. Some transfer materials require a waiting period after application: Siser specifies one in its S-print instructions, for example. That is not a rule for every printed T-shirt. If yours has just been printed, ask when it can be washed.
How to machine-wash a printed T-shirt
If machine washing is permitted, prepare the garment before choosing the programme:
- Turn the T-shirt inside out, keeping the design on the inside.
- Wash with similar colours, following any instructions to wash separately.
- Choose a gentle treatment that is compatible with both the care label and the print instructions.
- Use a mild detergent at the recommended dose, without adding products that the care instructions do not permit.
Epson also recommends washing T-shirts inside out when they have been produced using its textile printing systems. It is a useful precaution, rather than a guarantee against every kind of damage. Epson’s garment-handling instructions also recommend drying them inside out.
Three checks to remember
-
Read the instructions
Check the care label and any instructions specific to the print.
-
Turn it inside out
Keep the design on the inside of the T-shirt.
-
Choose the programme
Select a temperature and treatment suitable for the finished garment.
Can you use fabric softener or bleach?
If you do not have clear instructions, leave them out. Printful, for example, advises against fabric softener for its DTG and DTFlex garments. Bleaching instructions depend on the product: a white T-shirt is not automatically safe to bleach. See Printful’s care instructions for examples relating to its products.
Screen printing, DTG and transfers: what changes?
Knowing the printing method helps you find the right instructions. On its own, it does not tell you a washing temperature that works for every garment.
| Method | What to check before washing |
|---|---|
| Screen printing | The printer’s instructions for the ink and fabric used. Do not assume all screen prints have the same resistance to washing. |
| DTG: direct-to-garment printing | The instructions for the finished item. For its own DTG products, Printful recommends cold water, a gentle cycle and washing inside out. |
| Transfers | The instructions for the material applied. Washing temperature, any waiting period before the first wash and tumble-drying suitability can vary. |
A manufacturer’s recommendations describe its own products. They are not automatically instructions for every garment made with a similar technique. Read the guidance from Printful and Siser with that distinction in mind.
Avoid guessing from the feel of the design alone. Ask the supplier for the finished garment’s care instructions.
Drying and ironing: keep heat away from the print
After washing, check how the garment can be dried. Air drying is a cautious choice, but tumble drying is not prohibited for every print: some products allow a low-temperature setting. Printful permits this for certain printed garments, for example. Follow the specific drying instructions rather than a blanket rule.
Before ironing, check that it is permitted. If it is, work from the inside at the stated temperature, avoiding the printed area. Placing a cloth over the design does not automatically make direct contact with the iron safe.
Give your team the care instructions with their T-shirts
When T-shirts are handed out to colleagues, volunteers or event participants, the washing instructions should go with them. A short care sheet means people do not have to choose a programme by trial and error.
Before ordering new personalised T-shirts, explain how they will be used: occasionally, at events or as uniforms that need frequent washing. Ask which fabric and printing combinations suit that use, and what care they require. The same check is useful when choosing other personalised clothing for the team.
Choosing the garment and choosing how to wash it are part of the same decision. The best time to think about both is before the T-shirts are distributed, while the instructions can still reach everyone.
Sources and care guidance
- GINETEX — the meaning and scope of textile care labels.
- Epson — handling instructions for T-shirts printed using its systems.
- Printful — washing, drying and ironing instructions for its products.
- Siser — application and washing instructions for S-print.
Guidance for specific manufacturers and materials illustrates how care instructions can differ. It is not a care guarantee for all Loopper products.